Plastic saddle ring packing is a new type of packing improved on the basis of rectangular saddle ring packing. The smooth arc side of the rectangular saddle packing is changed to a serrated or convex side. In this way, the contact gap between the packings is increased in the packing bed, making it more conducive to the flow and dispersion of gas and liquid in the packing layer. It has the characteristics of low pressure drop and high mass transfer efficiency. It is widely used in drying towers and absorption towers in sulfuric acid production.

Product features of plastic saddle ring packing:

The characteristics of plastic saddle ring packing are that the fan-shaped arc surface is improved into a shell-shaped arc surface with serrated edges, and the openings are increased to communicate the inner and outer surfaces of the packing, increase the free channel of the fluid, and facilitate the distribution of liquid and the renewal of the surface. Therefore, the processing capacity is higher than that of the rectangular saddle ring, the pressure drop is small, and the mass transfer performance is improved. In summary, it has the characteristics of large porosity, low pressure drop and mass transfer unit height, high flooding point, sufficient gas-liquid contact, small specific gravity, high mass transfer efficiency, low pressure drop, large flux, high efficiency, large load elasticity, good anti-fouling, etc. It also has excellent acid and heat resistance, and can resist corrosion from various inorganic acids, organic acids and organic solvents except hydrofluoric acid. Ceramic iso-saddle ring packing can be used in various high-temperature occasions and has a wide range of applications.

Application range of plastic iso-saddle ring packing:

Plastic iso-saddle ring packing can be used in drying towers, absorption towers, cooling towers, washing towers, regeneration towers, etc. in chemical, metallurgical, coal gas, environmental protection and other industries.