Ceramic cross spacer ring packing is in the Lacy ring on the basis of the improvement, in a similar ring to add the spacer way, expand the specific surface area, while increasing the compressive strength of porcelain packing, usually used in the whole masonry for the first layer of support for the small filler with a relatively low pressure drop, the ditch flow and the wall flow is less. Generally made of ceramic. Ceramic cross spacer ring packing based on increasing the specific surface of the packing to strengthen the mass transfer efficiency of the idea above and developed, in general, this packing due to the size of the larger, only for neat stacking, generally only as a loose stack of filler for the bottom of the tower to support the distribution of layer with 80-200mm specification of the cross spacer ring can be used as a support material, the void rate of more than 60%, the number of the number of integers. Ceramic cross spacer ring packing also has a high density and excellent acid and heat resistance, and can resist all kinds of inorganic acids, organic acids and organic solvents other than hydrofluoric acid corrosion. The proprietary structure of the cross ring so that the production of a low yield, our technical staff has been a breakthrough result, so that the yield increased to more than 90%, reducing the waste of materials, shorten the production and supply cycle, without delaying the majority of customers to use.

 

Ceramic cross spacer ring packing can be used in chemical industry, metallurgy, coal gas, environmental protection and other industries, such as drying tower, absorption tower, cooling tower, washing tower, regeneration tower.

Ceramic cross spacer ring packing chemical and physical properties:

&Chemical content