Ceramic iso-saddle ring packing is a new type of packing improved on the basis of rectangular saddle ring packing, the smooth curved side of the rectangular saddle packing is changed to serrated or textured raised side. In this way, in the packing bed, increase the gap between the filler contact, so that it is more conducive to the flow and dispersion of gas and liquid in the packing layer, with a lower pressure, mass transfer efficiency and other characteristics, widely used in the production of sulfuric acid in the drying tower and absorption tower.

 

Product characteristics of ceramic saddle ring packing:

Ceramic iso-saddle ring is characterized by the improvement of the fan-shaped arc into a shell-shaped arc with serrated edges, and increase the openings so that the packing internal and external surfaces to communicate with the increase in the free passage of the fluid, conducive to the distribution of liquids and the surface of the update, so compared with the rectangular saddle ring with high processing capacity, pressure drop small mass transfer performance has improved. Summarized with a large void ratio, pressure drop and mass transfer unit height is low, high flood point, vapor-liquid contact is sufficient, small specific gravity, high mass transfer efficiency, pressure reduction, large flux, high efficiency, load flexibility, good dirt resistance, etc., than and also has excellent acid and heat resistance, in addition to hydrofluoric acid in addition to a variety of inorganic acids, organic acids and organic solvents corrosion, ceramic iso-saddle ring filler can be used in a variety of high-temperature occasions, the range of applications is very wide. The scope of application is very wide.

 

The scope of application of ceramic isosaddle ring packing:

It can be used in drying tower, absorption tower, cooling tower, washing tower, regeneration tower and so on in chemical industry, metallurgy, coal gas, environmental protection and other industries.

Specification parameters of ceramic heterosaddle ring packing: